You could actually implement QoS by targeting several aspects of your home network. Here are the steps to configure your network router’s Quality of Service. Setting a Quality of Service rule for this would mean all devices, hosts or nodes connected to a specific Ethernet port shall be affected by the QoS rule. Setting a QoS rule to target this would mean a host or node specific rule.
This is a unique identifier issued to your network controller like Network Interface card or WiFi adapter. So if your set QoS rules for Netmask with 24-bit, you are targeting a possible 254 hosts. So if you set your netmask to 24-bit, ie 192.168.1.0/24, this would mean that your netmask covers IP addresses from 192.168.1.0 to 192.168.1.254. Your netmask setting is your IP address range. For example VoIP, Skype, or a name of a Game like Dota 2. Set priority rules based on service or application name. So if you want to configure a Quality of Service (QoS) rules on your DD-WRT network router, you could accomplish that by either bandwidth prioritization or traffic shaping.Īnd that’s what we’re going to do with this guide, using your DD-WRT flashed network/WiFi routers.īefore you start of with this guide, you should know first that you could actually set a QoS rule to target several aspects of your home network. You most probably searching for these terms when searching for guides to either limit the speed of your shared WiFi, throttle down the speed of downloads, or you need to prioritize on your gaming bandwidth.īandwidth prioritization, traffic shaping, speed limiter, all falls under the Quality of Service.
QoS, Bandwidth Prioritization, Traffic Shaping and Speed Limit
0 kommentar(er)
